The daily maintenance of box printing machines mainly includes the following aspects:
Mechanical parts inspection: Regularly check the mechanical parts of the equipment, such as conveyor belts, gears and bearings, to ensure that they are operating normally. If abnormal sound or wear is found, it should be replaced in time. The state of the conveyor belt directly affects the stability and printing quality of the equipment. It should be checked for wear, looseness or breakage, and adjusted or replaced in time.
Electrical system inspection: Check the power cord, plug and electrical connection to ensure that there is no aging or damage. The stability of the electrical system is directly related to the safe operation of the equipment. Once an abnormality is found, it must be handled by a professional.
Lubrication status inspection: The lubrication status of the machine is crucial to the operation of the equipment. The oil mark can be used to observe whether the oil circuit of the machine is unobstructed. If there is no oil in the oil mark or the oil mark is not clearly observed, the oil circuit should be stopped urgently to carefully check whether there is oil leakage. For machines using sliding bearings, low-speed operation is not conducive to lubrication, especially inching or low-speed operation has a greater impact on its lubrication. Therefore, before performing such operations, it is best to lubricate the machine idling first.
Regular cleaning: Regular cleaning is an important step in maintaining printing equipment. Impurities such as ink, paper scraps and dust accumulate inside the equipment, which may cause malfunctions or affect printing quality. After each printing task is completed, be sure to clean the ink channel to prevent the ink from drying and clogging. Different equipment has different cleaning methods. It is recommended to refer to the equipment manual for operation.
Reasonable use: Correct usage habits are crucial to extending the life of the equipment. Before using the equipment, be sure to read the operation manual carefully to ensure that it is operated in accordance with the specifications. When the equipment is running, overload operation should be avoided, the equipment operation time should be arranged reasonably, and the equipment should be "rested" in time to reduce the risk of failure.
Regular inspection and replacement of consumables: Regularly check the ink cartridges, ink rollers and other consumables of the printing press to ensure that they are in good condition. If there is wear or aging, they should be replaced in time. Use high-quality consumables and avoid using inferior ink or paper to avoid damage to the equipment.
Keep the equipment clean: Regularly clean the equipment housing and operation panel with a clean cloth and appropriate detergent to keep the appearance of the equipment clean and avoid the influence of dust on the inside of the equipment.
